video-pc/widgets/recorderwidget.cpp

#include "recorderwidget.h"
#include <QApplication>
#include <QDateTime>
#include <QDebug>
#include <QMessageBox>
#include <QFileDialog>
#include <QStandardPaths>
#include <QOpenGLFunctions>
#include <QPainter>

// 静态实例指针
RecorderWidget* RecorderWidget::s_instance = nullptr;

RecorderWidget::RecorderWidget(QWidget *parent)
    : QWidget(parent)
    , m_mainLayout(nullptr)
    , m_previewWidget(nullptr)
    , m_encoderComboBox(nullptr)
    , m_micComboBox(nullptr)
    , m_speakerComboBox(nullptr)
    , m_statusBar(nullptr)
    , m_statusLabel(nullptr)
    , m_timeLabel(nullptr)
    , m_encoderLabel(nullptr)
    , m_previewTimer(nullptr)
    , m_statusTimer(nullptr)
    , m_micDevices(nullptr)
    , m_speakerDevices(nullptr)
    , m_encoders(nullptr)
    , m_micCount(0)
    , m_speakerCount(0)
    , m_encoderCount(0)
    , m_isRecording(false)
    , m_isStreaming(false)
    , m_isInitialized(false)
    , m_previewWidth(0)
    , m_previewHeight(0)
{
    // 设置静态实例指针
    s_instance = this;
    // rtmp://106.55.186.74:1935/stream/V1/0198da41-cdb6-78e3-879d-2ea32d58f73f

    // 初始化默认设置
    m_settings.liveUrl = "rtmp://106.55.186.74:1935/stream/V1";
    m_settings.liveName = "0198da41-cdb6-78e3-879d-2ea32d58f73f";
    m_settings.outputDir = QStandardPaths::writableLocation(QStandardPaths::MoviesLocation).toStdString();
    m_settings.videoBitRate = 8000000;
    m_settings.videoFrameRate = 30;
    m_settings.videoQuality = 100;
    m_settings.audioBitRate = 128000;
    
    initUI();
    initRecorder();
    
    // 创建定时器（预览已移除，不再创建预览定时器）
    // m_previewTimer = new QTimer(this);
    // connect(m_previewTimer, &QTimer::timeout, this, &RecorderWidget::updatePreview);
    
    m_statusTimer = new QTimer(this);
    connect(m_statusTimer, &QTimer::timeout, this, &RecorderWidget::updateStatus);
    m_statusTimer->start(1000); // 每秒更新一次状态
}

RecorderWidget::~RecorderWidget()
{
    releaseRecorder();
    s_instance = nullptr;
}

void RecorderWidget::initUI()
{
    m_mainLayout = new QVBoxLayout(this);
    m_mainLayout->setContentsMargins(0, 0, 0, 0);
    
    // 预览区域已移除
    // m_previewWidget = new QOpenGLWidget(this);
    // m_previewWidget->setMinimumSize(640, 480);
    // m_previewWidget->setSizePolicy(QSizePolicy::Expanding, QSizePolicy::Expanding);
    
    // 控制区域
    QWidget* controlWidget = new QWidget(this);
    QHBoxLayout* controlLayout = new QHBoxLayout(controlWidget);
    
    // 移除设备/编码分组（编码器选择改由 MainPanel 控制）
    // QGroupBox* deviceGroup = new QGroupBox("设备/编码", this);
    // QVBoxLayout* deviceLayout = new QVBoxLayout(deviceGroup);
    
    // // 编码器选择（已移除）
    // QHBoxLayout* encoderLayout = new QHBoxLayout();
    // encoderLayout->addWidget(new QLabel("编码器:"));
    // m_encoderComboBox = new QComboBox(this);
    // encoderLayout->addWidget(m_encoderComboBox);
    // deviceLayout->addLayout(encoderLayout);
    
    // 右侧操作区已移除，所有控制按钮已迁移到MainPanel
    controlLayout->addStretch();
    
    // 状态栏
    initStatusBar();
    
    // 添加到主布局（预览区域已移除）
    // m_mainLayout->addWidget(m_previewWidget, 1);
    m_mainLayout->addWidget(controlWidget, 0);
    m_mainLayout->addWidget(m_statusBar, 0);
    
    // 连接信号槽已移除，按钮控制已迁移到MainPanel
}

void RecorderWidget::initStatusBar()
{
    m_statusBar = new QStatusBar(this);
    
    m_statusLabel = new QLabel("状态: 就绪", this);
    m_timeLabel = new QLabel("00:00:00", this);
    m_encoderLabel = new QLabel("编码器: 未选择", this);
    
    m_statusBar->addWidget(m_statusLabel);
    m_statusBar->addPermanentWidget(m_encoderLabel);
    m_statusBar->addPermanentWidget(m_timeLabel);
}

void RecorderWidget::initRecorder()
{
    // 设置回调函数
    setupCallbacks();
    
    // 设置录制器日志路径
    QString logPath = QStandardPaths::writableLocation(QStandardPaths::TempLocation) + "/recorder.log";
    recorder_set_logpath(logPath.toUtf8().constData());
    
    // 延迟刷新编码器列表，避免在构造函数中调用可能导致异常的API
    QTimer::singleShot(100, this, [this]() {
        refreshVideoEncoders();
    });
}

void RecorderWidget::releaseRecorder()
{
    if (m_isRecording || m_isStreaming) {
        recorder_stop();
    }
    
    if (m_isInitialized) {
        recorder_release();
        m_isInitialized = false;
    }
    
    // 释放设备数组
    if (m_micDevices) {
        recorder_free_array(m_micDevices);
        m_micDevices = nullptr;
    }
    if (m_speakerDevices) {
        recorder_free_array(m_speakerDevices);
        m_speakerDevices = nullptr;
    }
    if (m_encoders) {
        recorder_free_array(m_encoders);
        m_encoders = nullptr;
    }
}

void RecorderWidget::setupCallbacks()
{
    m_callbacks.func_duration = onDurationCallback;
    m_callbacks.func_error = onErrorCallback;
    m_callbacks.func_device_change = onDeviceChangeCallback;
    // 预览已移除，不再设置视频/音频预览回调
    m_callbacks.func_preview_yuv = nullptr;
    m_callbacks.func_preview_audio = nullptr;
}

void RecorderWidget::refreshAudioDevices()
{
    // 不再维护内部设备选择 UI，此处仅确保释放旧的查询结果
    if (m_micDevices) { recorder_free_array(m_micDevices); m_micDevices = nullptr; }
    if (m_speakerDevices) { recorder_free_array(m_speakerDevices); m_speakerDevices = nullptr; }
    m_micCount = 0;
    m_speakerCount = 0;
}

void RecorderWidget::refreshVideoEncoders()
{
    // 释放之前的编码器数组
    if (m_encoders) {
        recorder_free_array(m_encoders);
        m_encoders = nullptr;
    }
    
    // 获取视频编码器
    try {
        m_encoderCount = recorder_get_vencoders(&m_encoders);
        if (m_encoderComboBox) m_encoderComboBox->clear();
        for (int i = 0; i < m_encoderCount; ++i) {
            QString encoderName = QString::fromUtf8(m_encoders[i].name);
            if (m_encoderComboBox) m_encoderComboBox->addItem(encoderName);
        }
        
        // 同步默认或外部选择
        if (m_encoderCount > 0) {
            if (m_selectedEncoderId >= 0) {
                // 若已由外部选择，则优先匹配该ID
                int matchIndex = -1;
                for (int i = 0; i < m_encoderCount; ++i) {
                    if (m_encoders[i].id == m_selectedEncoderId) { matchIndex = i; break; }
                }
                if (matchIndex >= 0 && m_encoderComboBox) {
                    m_encoderComboBox->setCurrentIndex(matchIndex);
                }
                if (m_encoderLabel) {
                    const char* nm = (matchIndex >= 0) ? m_encoders[matchIndex].name : nullptr;
                    m_encoderLabel->setText(QString("编码器: %1").arg(nm ? nm : "已选择"));
                }
            } else {
                // 否则选择第一个并更新状态
                if (m_encoderComboBox) m_encoderComboBox->setCurrentIndex(0);
                if (m_encoderLabel) m_encoderLabel->setText(QString("编码器: %1").arg(m_encoders[0].name));
            }
        }
    } catch (...) {
        m_encoderCount = 0;
        qWarning() << "Failed to get video encoders";
        if (m_encoderLabel) m_encoderLabel->setText("编码器: 获取失败");
    }
}

void RecorderWidget::setSettings(const Settings& settings)
{
    m_settings = settings;
}

void RecorderWidget::setMicDevice(const AMRECORDER_DEVICE& device)
{
    m_selectedMicDevice = device;
    qDebug() << "[RecorderWidget] 设置麦克风设备:" << device.name;
}

void RecorderWidget::setSpeakerDevice(const AMRECORDER_DEVICE& device)
{
    m_selectedSpeakerDevice = device;
    qDebug() << "[RecorderWidget] 设置扬声器设备:" << device.name;
}

// 新增：外部设置视频编码器ID
void RecorderWidget::setVideoEncoderId(int encId)
{
    m_selectedEncoderId = encId;
    // 同步状态栏显示与内部下拉框（若存在）
    const char* encName = nullptr;
    if (m_encoders) {
        for (int i = 0; i < m_encoderCount; ++i) {
            if (m_encoders[i].id == encId) {
                encName = m_encoders[i].name;
                if (m_encoderComboBox) {
                    m_encoderComboBox->blockSignals(true);
                    m_encoderComboBox->setCurrentIndex(i);
                    m_encoderComboBox->blockSignals(false);
                }
                break;
            }
        }
    }
    if (m_encoderLabel) {
        if (encName) m_encoderLabel->setText(QString("编码器: %1").arg(encName));
        else m_encoderLabel->setText(QString("编码器: %1").arg(encId));
    }
}
static void copyDevice(AMRECORDER_DEVICE &dst, const AMRECORDER_DEVICE &src)
{
    strcpy_s(dst.id, src.id);
    strcpy_s(dst.name, src.name);
    dst.is_default = src.is_default;
}

static void chooseDefaultIfEmpty(AMRECORDER_DEVICE &dstMic, AMRECORDER_DEVICE &dstSpeaker)
{
    // 若未设置，尝试从系统枚举中选择默认设备
    if (dstMic.id[0] == '\0') {
        AMRECORDER_DEVICE *mics = nullptr;
        int micCount = 0;
        try { micCount = recorder_get_mics(&mics); } catch(...) { micCount = 0; }
        if (micCount > 0 && mics) {
            int idx = 0;
            for (int i = 0; i < micCount; ++i) { if (mics[i].is_default) { idx = i; break; } }
            copyDevice(dstMic, mics[idx]);
        }
        if (mics) recorder_free_array(mics);
    }
    if (dstSpeaker.id[0] == '\0') {
        AMRECORDER_DEVICE *speakers = nullptr;
        int spkCount = 0;
        try { spkCount = recorder_get_speakers(&speakers); } catch(...) { spkCount = 0; }
        if (spkCount > 0 && speakers) {
            int idx = 0;
            for (int i = 0; i < spkCount; ++i) { if (speakers[i].is_default) { idx = i; break; } }
            copyDevice(dstSpeaker, speakers[idx]);
        }
        if (speakers) recorder_free_array(speakers);
    }
}

bool RecorderWidget::startRecording()
{
    if (m_isRecording) {
        return true;
    }
    
    // 准备录制设置
    memset(&m_recorderSetting, 0, sizeof(m_recorderSetting));
    
    // 视频设置
    m_recorderSetting.v_left = 0;
    m_recorderSetting.v_top = 0;
    m_recorderSetting.v_width = GetSystemMetrics(SM_CXSCREEN);
    m_recorderSetting.v_height = GetSystemMetrics(SM_CYSCREEN);
    m_recorderSetting.v_qb = m_settings.videoQuality;
    m_recorderSetting.v_bit_rate = m_settings.videoBitRate;
    m_recorderSetting.v_frame_rate = m_settings.videoFrameRate;
    
    // 选择编码器
    int encoderIndex = m_encoderComboBox ? m_encoderComboBox->currentIndex() : -1;
    if (m_selectedEncoderId >= 0) {
        m_recorderSetting.v_enc_id = m_selectedEncoderId;
    } else if (encoderIndex >= 0 && encoderIndex < m_encoderCount && m_encoders) {
        m_recorderSetting.v_enc_id = m_encoders[encoderIndex].id;
    }
    
    // 输出文件
    QString fileName = QString::fromStdString(m_settings.outputDir);
    if (!fileName.endsWith("/") && !fileName.endsWith("\\")) {
        fileName += "/";
    }
    fileName += QDateTime::currentDateTime().toString("yyyy-MM-dd-hh-mm-ss") + ".mp4";
    strcpy_s(m_recorderSetting.output, fileName.toUtf8().constData());
    
    // 音频设备设置：优先使用外部指定，否则选默认
    AMRECORDER_DEVICE mic = m_selectedMicDevice;
    AMRECORDER_DEVICE spk = m_selectedSpeakerDevice;
    chooseDefaultIfEmpty(mic, spk);
    if (mic.id[0] != '\0') copyDevice(m_recorderSetting.a_mic, mic);
    if (spk.id[0] != '\0') copyDevice(m_recorderSetting.a_speaker, spk);
    
    // 异步初始化和启动录制器，避免主线程阻塞
    QFuture<void> future = QtConcurrent::run([this]() {
        // 初始化录制器
        int result = recorder_init(m_recorderSetting, m_callbacks);
        if (result != 0) {
            QString error = QString("初始化录制器失败: %1").arg(recorder_err2str(result));
            QMetaObject::invokeMethod(this, [this, error]() {
                emit errorOccurred(error);
                if (m_statusLabel) {
                    m_statusLabel->setText("状态: 就绪");
                }
            }, Qt::QueuedConnection);
            return;
        }
        
        m_isInitialized = true;
        
        // 关闭预览
        recorder_set_preview_enabled(0);
        
        // 开始录制
        result = recorder_start();
        if (result != 0) {
            QString error = QString("开始录制失败: %1").arg(recorder_err2str(result));
            QMetaObject::invokeMethod(this, [this, error]() {
                emit errorOccurred(error);
                recorder_release();
                m_isInitialized = false;
                if (m_statusLabel) {
                    m_statusLabel->setText("状态: 就绪");
                }
            }, Qt::QueuedConnection);
            return;
        }
        
        // 成功启动录制
        QMetaObject::invokeMethod(this, [this]() {
            m_isRecording = true;
            m_recordStartTime = QTime::currentTime();
            
            // 预览已移除，不再启动预览定时器
            // if (m_previewTimer) m_previewTimer->start(33);
            
            emit recordingStarted();
        }, Qt::QueuedConnection);
    });
    
    // 立即更新UI状态，显示正在初始化
    m_statusLabel->setText("状态: 初始化中...");
    
    return true;
}

void RecorderWidget::stopRecording()
{
    if (!m_isRecording) {
        return;
    }
    
    recorder_stop();
    
    if (m_isInitialized) {
        recorder_release();
        m_isInitialized = false;
    }
    
    m_isRecording = false;
    
    // 预览已移除，不再停止预览定时器
    // if (m_previewTimer) m_previewTimer->stop();
    
    emit recordingStopped();
}

bool RecorderWidget::startStreaming()
{
    if (m_isStreaming) {
        return true;
    }
    
    // 准备推流设置
    memset(&m_recorderSetting, 0, sizeof(m_recorderSetting));
    
    // 视频设置
    m_recorderSetting.v_left = 0;
    m_recorderSetting.v_top = 0;
    m_recorderSetting.v_width = GetSystemMetrics(SM_CXSCREEN);
    m_recorderSetting.v_height = GetSystemMetrics(SM_CYSCREEN);
    m_recorderSetting.v_qb = m_settings.videoQuality;
    m_recorderSetting.v_bit_rate = m_settings.videoBitRate;
    m_recorderSetting.v_frame_rate = m_settings.videoFrameRate;
    
    // 选择编码器
    int encoderIndex = m_encoderComboBox ? m_encoderComboBox->currentIndex() : -1;
    if (m_selectedEncoderId >= 0) {
        m_recorderSetting.v_enc_id = m_selectedEncoderId;
    } else if (encoderIndex >= 0 && encoderIndex < m_encoderCount && m_encoders) {
        m_recorderSetting.v_enc_id = m_encoders[encoderIndex].id;
    }
    
    // 推流地址
    QString streamUrl = QString::fromStdString(m_settings.liveUrl + "/" + m_settings.liveName);
    strcpy_s(m_recorderSetting.output, streamUrl.toUtf8().constData());
    
    // 音频设备设置：优先使用外部指定，否则选默认
    AMRECORDER_DEVICE mic = m_selectedMicDevice;
    AMRECORDER_DEVICE spk = m_selectedSpeakerDevice;
    chooseDefaultIfEmpty(mic, spk);
    if (mic.id[0] != '\0') copyDevice(m_recorderSetting.a_mic, mic);
    if (spk.id[0] != '\0') copyDevice(m_recorderSetting.a_speaker, spk);

    qDebug() << m_recorderSetting.output;
    // 异步初始化和启动推流，避免主线程阻塞
    QFuture<void> future = QtConcurrent::run([this]() {
        // 初始化录制器
        int result = recorder_init(m_recorderSetting, m_callbacks);
        if (result != 0) {
            QString error = QString("初始化推流失败: %1").arg(recorder_err2str(result));
            QMetaObject::invokeMethod(this, [this, error]() {
                emit errorOccurred(error);
                if (m_statusLabel) {
                    m_statusLabel->setText("状态: 就绪");
                }
            }, Qt::QueuedConnection);
            return;
        }
        
        m_isInitialized = true;
        
        // 关闭预览
        recorder_set_preview_enabled(0);
        
        // 开始推流
        result = recorder_start();
        if (result != 0) {
            QString error = QString("开始推流失败: %1").arg(recorder_err2str(result));
            QMetaObject::invokeMethod(this, [this, error]() {
                emit errorOccurred(error);
                recorder_release();
                m_isInitialized = false;
                if (m_statusLabel) {
                    m_statusLabel->setText("状态: 就绪");
                }
            }, Qt::QueuedConnection);
            return;
        }
        
        // 成功启动推流
        QMetaObject::invokeMethod(this, [this]() {
            m_isStreaming = true;
            m_recordStartTime = QTime::currentTime();
            
            // 预览已移除，不再启动预览定时器
            // if (m_previewTimer) m_previewTimer->start(33);
            
            emit streamingStarted();
        }, Qt::QueuedConnection);
    });
    
    // 立即更新UI状态，显示正在初始化
    m_statusLabel->setText("状态: 连接中...");
    
    return true;
}

void RecorderWidget::stopStreaming()
{
    if (!m_isStreaming && !m_isInitialized) {
        return;
    }

    if (m_statusLabel) {
        m_statusLabel->setText("状态: 正在停止...");
    }

    QtConcurrent::run([this]() {
        // 停止推流并释放资源（与 startStreaming 对称）
        recorder_stop();
        if (m_isInitialized) {
            recorder_release();
        }

        QMetaObject::invokeMethod(this, [this]() {
            m_isStreaming = false;
            m_isInitialized = false;
            if (m_statusLabel)
                m_statusLabel->setText("状态: 就绪");
            emit streamingStopped();
        }, Qt::QueuedConnection);
    });
}

void RecorderWidget::setLiveName(const QString& name)
{
    m_settings.liveName = name.toStdString();
}

// 新增：供MainPanel调用的按钮功能
void RecorderWidget::onRecordButtonClicked()
{
    if (m_isRecording) {
        stopRecording();
    } else {
        startRecording();
    }
}

void RecorderWidget::onStreamButtonClicked()
{
    if (!m_isStreaming) {
        if (startStreaming()) {
            if (m_statusLabel) {
                m_statusLabel->setText("状态: 推流中");
            }
        }
    } else {
        stopStreaming();
        if (m_statusLabel) {
            m_statusLabel->setText("状态: 就绪");
        }
    }
}

void RecorderWidget::onSettingsButtonClicked()
{
    // 打开设置对话框
    QMessageBox::information(this, "设置", "设置功能待实现");
}

void RecorderWidget::updatePreview()
{
    if (m_previewWidget && m_previewWidth > 0 && m_previewHeight > 0) {
        m_previewWidget->update();
    }
}

// 预览显示控制方法实现
void RecorderWidget::showPreview()
{
    if (m_previewWidget) {
        m_previewWidget->show();
    }
}

void RecorderWidget::hidePreview()
{
    if (m_previewWidget) {
        m_previewWidget->hide();
    }
}

bool RecorderWidget::isPreviewVisible() const
{
    return m_previewWidget ? m_previewWidget->isVisible() : false;
}


void RecorderWidget::updateStatus()
{
    if (m_isRecording || m_isStreaming) {
        QTime currentTime = QTime::currentTime();
        int elapsed = m_recordStartTime.secsTo(currentTime);
        int hours = elapsed / 3600;
        int minutes = (elapsed % 3600) / 60;
        int seconds = elapsed % 60;
        
        QString timeStr = QString("%1:%2:%3")
                         .arg(hours, 2, 10, QChar('0'))
                         .arg(minutes, 2, 10, QChar('0'))
                         .arg(seconds, 2, 10, QChar('0'));
        m_timeLabel->setText(timeStr);
    } else {
        m_timeLabel->setText("00:00:00");
    }
}

// 静态回调函数实现
void RecorderWidget::onDurationCallback(uint64_t duration)
{
    if (s_instance) {
        // 可以在这里处理持续时间更新
        qDebug() << "Recording duration:" << duration << "ms";
    }
}

void RecorderWidget::onErrorCallback(int error)
{
    if (s_instance) {
        QString errorStr = QString("录制错误: %1").arg(recorder_err2str(error));
        QMetaObject::invokeMethod(s_instance, "errorOccurred", Qt::QueuedConnection, Q_ARG(QString, errorStr));
    }
}

void RecorderWidget::onDeviceChangeCallback(int type)
{
    Q_UNUSED(type);
    // 不再自动刷新内部设备列表，由主界面设备选择器负责
}

void RecorderWidget::onPreviewYUVCallback(const unsigned char *data, unsigned int size, int width, int height, int type)
{
    if (s_instance && data && size > 0) {
        QMutexLocker locker(&s_instance->m_previewMutex);
        s_instance->m_previewData = QByteArray(reinterpret_cast<const char*>(data), size);
        s_instance->m_previewWidth = width;
        s_instance->m_previewHeight = height;
    }
}

void RecorderWidget::onPreviewAudioCallback()
{
    // 音频预览回调，暂时不处理
}